User Guide

3. Installation

AirLive N.MINI User’s Manual

3.1.3 Bridging the Network

Configure one N.MINI as AP and the other as Client…

Step1. Please set one N.MINI to AP mode and the other N.MINI to Client mode. Using the

hardware switch in the back of the APs.

Step2. Wait for about 2 minutes for both AP to finish reboot

Step3. Connect the "AP mode" N.MINI to the Internet by Ethernet cable

Step4. Connect the "Client mode" N.MINI to an electronic device such as PC, game

console, media player, or IP Set-top box.

Step5. Press the WPS push button on the "AP mode" N.MINI until the WPS LED blinks.

Step6. Then, press the WPS push button on the "Client mode" N.MINI until the WPS LED

blinks

Step7. Wait for 2 minutes for the connection to establish between 2 N.MINIs.