User Manual

3. Configuration
AirLive N450R User’s Manual
25
3.2.1 Network Setup
There are two ways to configure the network, respectively LAN Setup and Internet
setup.
n LAN Setup
1. LAN IP Address
The local IP address of this device, the computer on your network must use the LAN IP
address of this device as their Default Gateway. You can change it if necessary.
2. Subnet Mask
Input your Subnet mask. (All devices in the network must have the same subnet mask.)
The default subnet mask is 255.255.255.0.
n Internet Setup
1. Combo WAN Status
Display status of combo WANS. With Combo WAN feature, you can choose one
primary WAN connection, and set another WAN connection for backup. Otherwise,
you can also choose “Load Sharing” to use Ethernet WAN and 3G WAN
simultaneously. The combo WAN status will be showed here. Press “Settings” button
to configure this feature.
2. WAN Interface
Select Ethernet WAN or Wireless WAN to continue.
n Ethernet WAN