User Guide

AirLive NVR4 User’s Manual

You may click on the button highlighted below to perform search again. Or double-click on

any of the search results to access NVR’s web ad- ministration page

You should be prompted for the NVR’s username and password. Enter its default username

“admin” and password “airlive” and then click on”OK” to enter the system

2.3.2.2 Access NVR with its default IP address

The NVR comes with a pre-configured static IP “192.168.1.1. However, it is only used when

there is no DHCP server presented in the network. The NVR will turn on its DHCP server

function and act as the DHCP server in the network. To connect to the NVR, use a PC that

is on the same network over a switch or hub, or connect the PC directly to the NVR using a

crossover CAT5 Ethernet cable.

Perform NVR Searching again.

Double click for accessing the NVR