User Guide

AirLive NVR4 User’s Manual
14
2.4.1 Format the hard disk
Once you install a hard disk to the NVR, you need to initialize it so that it can be ready for
recording. You can obtain the basic information about the disk you installed on the “Hard
Disk Setting” page (SetupSystem ConfigurationDisk Setup).
To initialize your hard disk, simply click the “Format” button. Please note, after performing
the format, all the data on the hard disk will disappear.
Note: To obtain detail information about the disk, go to “System Options”“Disk Status”
2.4.2 Connect to your IP cameras
The NVR provides two options for adding a new IP camera. Users have the option to let the
NVR automatically find the cameras or to enter the camera’s information and add it
manually.
2.4.2.1 Automatic search:
Click the “Search” button to perform the camera search.
After that, the NVR should begin to search the IP camera and the progress of the searching
should be displayed on the screen:
Found IP cameras should be listed on the WEB. User can simply select a camera from the