User Guide

AirLive NVR4 User’s Manual
35
In this chap, it will show you how to set the system configuration for your NVR.
 5.1 System Configurations
The “System Configurations” page provides users options to setup the device quickly and
properly. After properly configuring all settings in all the sub-pages, users should expect a
fully working network video recorder that is ready to manage cameras on the network. We
will start by configuring its network settings to make sure it works correctly in your network.
Next, we will help you adjust the system time so videos will be recorded with correct
timestamp. To better secure the system for unwanted disturbance, we will guide you on
setting up user’s account and privileges to prevent settings gets altered by users other than
the system administrator. Lastly, we will tell you what you should expect after installing a
hard disk and how to prepare the hard disk for the video recording.
5.1.1 Network Settings
You need to adjust settings in this page for the device to work properly in your network. It is
critical that settings here are configured correctly based on your network environment so
that the NVR can be administered through the local area network and cameras can be
connected with it.
By default, the NVR is set to obtain its IP address from DHCP server, and most likely you
5
5. System Setup