User Guide

AirLive NVR4 User’s Manual

Note: To obtain detail information about the disk, go to “System Options”“Disk Status”

 5.2 Channel Configurations

5.2.1 Add a Camera

The NVR provides two options for adding a new IP camera. Users have the option to let the

NVR automatically find the cameras or to enter the camera’s information and add it

manually.

Note: You should be prompted to install another ActiveX component after you open the

“Channel Setting” page. In order to make the search function work properly, please go

ahead and install the ActiveX component.

5.2.1.1 Automatic Search:

Click the “Search” button to perform the camera search.

After that, the NVR should begin to search the IP camera and the progress of the searching

should be displayed on the screen:

Found IP cameras should be listed on the WEB. User can simply select a camera from the

list and press “Configure” button for configuration.