User Guide

AirLive NVR4 User’s Manual
43
English
User’s Manual
“Add” to finish adding the camera.
Note: We highly recommend our user to choose mpeg4 or H.264 compression format. For
that will not only save the network bandwidth but also save the NVR’s storage space. If it is
possible, we also advised our user to set his surveillance system upon an independent
network segment or VLAN. This should help to avoid the network collision and make the
NVR its best performance.
Note: After auto search, if there was any IP camera marked with “*” on the list, that means
the IP camera was already configured and connected to NVR.
5.2.1.2 Add a camera manually
Simply follow the instruction described above but instead of using the “Search” function by
entering the camera’s IP address and credential in the “Camera Information” manually.