User Guide

AirLive NVR4 User’s Manual
55
the cameras. For setting the DI event, select the “DI Setting”, and then you might select the
desired camera, its DI port, and the triggering condition.
5.3.3 Event Servers
Event servers are to be used with event trigger actions. In case of unusual motion detected
by the camera or a disk failure, the NVR can send notification with the acceptable format
(image/txt) to a destined event server according to the configuration.
5.3.2.1 Configuring an FTP server
a. Start by giving a name to the server profile that you are adding to the NVR.
b. Enter the hostname or the IP address of the FTP server.
c. Enter the communication port of the FTP server (usually port 21).