User Guide

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
OV-110 Series
10/100BASE-TX to 100BASE-FX
Media Converter
Standard
- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX/100BASE-FX
- IEEE802.3x Flow Control and Back pressure
Interface
- Fiber: Duplex ST/SC, Simplex SC (WDM single
mode)
- RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair
cable
- Auto MDI/MDI-X
- Auto-Negotiation Function
Switch architecture
- Store and forward switch architecture.
Fiber parameters
- Fiber Core: Multi-Mode (62.5/125um, 50/125um),
Single-Mode (9/125μm)
- Wavelength:
- 1310nm (Multi-mode, Single mode)
- 1550nm(WDM, TX), 1310nm(WDM, RX)
- Fiber Distance:
- Multi-Mode Fiber: 2KM
- Single-Mode Fiber: 60KM
- WDM (Single-Mode): 20KM
Transparent packet
- 64 to 1518 Bytes for Non-VLAN Ethernet packet
Link Lost Forward
- UTP→Fiber: If UTP port link down, then converter
will forced fiber to link down.
- Fiber→UTP: If Fiber port link down, the media
converter will force UTP port to link down.
DIP Switch
- DIP Switch 1: UTP Auto-Nego / 100Mbps Full Duplex
mode
- DIP Switch 2: Fiber Full/Half Duplex
- DIP Switch 3: LLF (Link Lose Forwarding) Disable/
Specifi cations
he OV-110 Series is a cost-effective solution
for the converting between 10/100Base-
TX and 100Base-FX cabling, it allows you to
extend the cabling distance of your 100Base-FX
network up to 2 kilometers for multi-mode fiber or
60 kilometers for single-mode fiber. The OV-110
Series gives you the option to choose from SC/
ST multi- mode fiber connector and SC single-
mode fiber connector. The Fast Fiber Converters
provides you with one Fiber connector for your
fiber optic cable and one Ethernet RJ-45 port (Auto
MDI/MDIX) for your 100BaseTX copper cable
connection. There are 4 DIP- switches to set the
operation mode for UTP, Fiber ports and link loss
forwarding function.
T