Instruction Manual
AirLiveWL‐2000CAMUser’sManual
28
6.2.1.2 Alarm Sending
Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the
external sensor input or by the built-in motion detection function. Select On to send the image and audio file to
FTP server linked with the alarm detection.
Remote path：Type the path to the destination in FTP server up to 64 characters.
Image file name：Type the file name you want to assign to the images when sending to the FTP server. You
can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming.
Suffix：Select a suffix to add to the file name:
Date & time: The date & time suffix is added to the Image file name. The date/time suffix consists of lower
two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits),
and consecutive number (2 digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed
digits 00 are added to the Image file name.
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set the motion
detection function page.
Effective period：Set the period when the periodical sending is effective.
Always：The periodical sending is always effective.
Schedule：You can specify the period when the periodical sending is effective in the schedule setting in the
other section. Click Schedule and the setting menu for the effective period is displayed.