Instruction Manual


AirLivePOE200CAMv2User’sManual
69
【Step3】Schedule a Weekly Setting
Click the Schedule Setting button. A Weekly
Setting table will pop up. Select the time period
for which you want to schedule a recording. The
activated block will turn pink.
【Step4】Edit a Schedule
To cancel or modify a schedule setting, click the
pink block to deactivate it.
【Step5】Run schedule recording automatically
Schedule recording will be executed immediately
after click “OK” in Weekly Setting and Image
setting window.
Copy..: If you want to copy the setting from one
of the existing setting, click “Copy” to select the
device you want to copy from, you can easily
copy all the setting information. This function
could be found in Image setting, weekly setting,
alarm action, etc.
【Note】Weekly setting is a cycling setting which is automatically applied to the following week, with
each block being equal to 1 hour.
If an error message pops up, please check if any
related device is unable to connect due to the
information described in Error Message window.
Solve the problem, and then go back to LanCam
Setting button to configure this device again.