User`s manual

4. Web Management in SNMP-GSH2404L
AirLive SNMP-GSH2404L User’s Manual
36
Function name:
802.1X Configuration
Function description:
This function is used to configure the global parameters for RADIUS authentication in
802.1x port security application.
Parameter description:
Mode:
Enable or disable 802.1X function.
RADIUS IP:
RADIUS server IP address for authentication.
Default: 0.0.0.0
RADIUS UDP Port:
The port number to communicate with RADIUS server for the authentication
service. The valid value ranges 1-65535.
Default port number is 1812.
RADIUS Secret:
The secret key between authentication server and authenticator. It is a string with
the length 1 – 15 characters. The character string may contain upper case, lower
case and 0-9. It is character sense. It is not allowed for putting a blank between
any two characters.
Default: None
Admin State:
This is used to set the operation mode of authorization. There are three type of
operation mode supported, Force Unauthorized, Force Authorized, Auto.
z Force Unauthorized: The controlled port is forced to hold in the unauthorized
state.
z Force Authorized: The controlled port is forced to hold in the authorized state.
z Auto: The controlled port is set to be in authorized state or unauthorized state
depends on the result of the authentication exchange between the
authentication server and the supplicant.
Default: Force Authorized
Port State:
Show the port status of authorization.
Re-authenticate:
Specify if subscriber has to periodically re-enter his or her username and
password to stay connected to the port.
Re-authenticate All: