User`s manual

4. Web Management in SNMP-GSH2404L

AirLive SNMP-GSH2404L User’s Manual

Parameter description:

ICMP Rate:

To enable the ICMP Storm capability. User can use drop-down menu to select

number of frames. Default is No Limit. The setting range is 1k~1024k per second.

Learn Frames Rate:

To enable the Learn Frames Storm capability. User can use drop-down menu to

select number of frames. Default is No Limit. The setting range is 1k~1024k per

second.

Broadcast Rate:

To enable the Broadcast Storm capability. User can use drop-down menu to select

number of frames. Default is No Limit. The setting range is 1k~1024k per second.

Multicast Rate:

To enable the Multicast Storm capability. User can use drop-down menu to select

number of frames. Default is No Limit. The setting range is 1k~1024k per second.

Flooded unicast Rate:

To enable the Flooded unicast Storm capability. User can use drop-down menu to

select number of frames. Default is No Limit. The setting range is 1k~1024k per

second.

NOTE: After completing the function’s setting, press <Apply> button to have this

function taken effect.

4.2.15 SNMP

Any Network Management System (NMS) running the Simple Network Management

Protocol (SNMP) can manage the Managed devices equipped with SNMP agent, provided

that the Management Information Base (MIB) is installed correctly on the managed devices.

It is a protocol used to govern the transfer of information between SNMP manager and

agent and traverses the Object Identity (OID) of the management Information Base (MIB),

described in the form of SMI syntax. SNMP agent is running on the switch to response the

request issued by SNMP manager.

Basically, it is passive except issuing the trap information. The switch supports a switch to

turn on or off the SNMP agent. If you set the field SNMP “Enable”, SNMP agent will be

started up. If the field SNMP is set “Disable”, SNMP agent will be de-activated, the related

Community Name, Trap Host IP Address, Trap and all MIB counters will be ignored.

Function name:

SNMP Configuration

Function description: