Manual

6. Web Management in WFP-151U
AirLive WFP-151U User’s Manual
56
Connected: a user clicks “Connect” button in the “MFP Manager” utility, and the connection
between the user’s computer and the MFP is built.
Ready: the MFP or printer is not connected by a user and is ready to use.
Off Line: the MFP or printer is not connected by a user and is not connected to MFP Server
through USB cable or it is turned off.
Paper Out: the MFP or printer not connected by a user and is paper out.
6.3.3 TCP/IP
This page lists all TCP/IP settings of the MFP Server including “IP Address”, “Subnet Mask”
and “Gateway”. It also can tell the DHCP server is “On” or “Off”.
6.4 Setup Wizard
Note: You can configure the MFP Server from the Setup Wizard. To let the changes take
effect, you have to click “Save Settings” in the menu of the left side to reboot the MFP
Server.