Manual

39 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
Chapter 6: Wireless Access Client Configuration
This chapter describes the items about set up Wireless Access Client function. Those items are under the
Wireless
Access Point Configuration menu. If you don’t know how to enter configuration screen, chapter 2
describes
how to do it. Please keep in mind that you need click Apply to save all settings.
There are two options under System Configuration:
• General
• Encryption
6.1 Wireless Bridge – General
Click the entry on the left hand navigation panel for Wireless Client – General . This directs you to this page.
The
procedure of how to set up WH-5000A to link with AP lists as following.
1. Operation mode:
Click the entry on the left hand navigation panel for System Configuration – Operation mode . Select
the
operation mode as “ Wireless Client ” and click Apply button.
2. SSID:
This nomenclature of SSID has to be same as the one on the access point which WH-5000A want to
link with. The bundle Site Survey function can help you discover the APs in your environment and
choose a one to link with. To do Site Survey, click the Scan at Site Survey section.
3. Wireless Mode:
Select the wireless mode from the drop-down list. You can choose from the following options:
• 802.11b
• 802.11g
• 802.11g Super
• 802.11a
• 802.11a Turbo
4. Click Connect button.
The bundle Status function
let you easy to understand
link status. You can click
Refresh at Status Section
after WH-5000A link with AP,
and then you can get link
status information.