Manual

7.2 Wireless Bridge – Radio

y MAC Address:

This is the MAC Address for WLAN card and as BSSID for the bridge devices at

the other end

that want to link with this unit. The Wireless Bridging uses the BSSID for purposes of

establishing contact.

y Wireless M

ode:

WH-9100MESH supports 802.11 b/g Mixed, 802.11g

Super and 802.11a modes

Note: When t

he WH-9100MESH’s AP is working, we don’t suggest you set up the

bridge’s Wireless mode as 802.11g Super mode. This is because the 802.11g

Supper mode occupy large frequency bandwidth, it may interfere the AP’s

radio signal.

y Tx Rates:

When set to AUTO, the unit attempts to select the opt

imal rate for the channel. If a fixed rate is

used, the unit will only transmit at that rate.

y Chan

nel No:

The channel number is a means of an assigni

ng frequency that device uses it to

transmit/receive data. The channel number should be same as the one using on the devices

those will be bridge together.

y Tx P

wr Mode:

It is same as AP, support Off, Fix and Auto modes. At Fix mode, th

ere are 5 signal levels you

can select (1 being the smallest power level). If you want to prevent any radio frequency

transmission, set Tx Pwr Mode to off.

AirLive WH-9100-MESH User’s Manual