Manual

Click the entry on the left hand navigation panel for Wireless Bridge-General and choose Auto Bridging,
directs you to this page.
y SSID:
The SSID can be treated as a nickname of Auto Bridge network. The SSID of bridge
s those you
want to link together need be same.
y Max Au
to Bridges:
Maximum number of auto bridge allowed
y Bridge Priori
ty:
Determining the root device and routing path cost, the lowe
st bridge priority in the network will
become the root device of bridge network topology.
y Signal Stren
gth Threshold:
If the signal
strength of remote node is blow this threshold. The link will be dropped.
y Broad
cast SSID
It on by default to enabled bridge will use SSID for token for communication. If don’t like SSID be
exposed, it can be di
sable. However both setting must be same, otherwise the devices cannot
bridge together.
y Signal Strength MAC:
Choosing the BSSID that you want to know the receiv
ed signal strength, the SS LED will indicate
the signal strength by different flicker frequency. If you don’t wish to display any connection signal,
just leave it as empty. You need click “Set” after you change this value.
AirLive WH-9100-MESH User’s Manual
47