Manual

7. Application Example: Infrastructure

AirLive WHA-5500CPE-NT User’s Manual

104

7.2.2 Device A Bandwidth Management

This purpose is to limit the bandwidth of each wireless client in “airliveclient” network to

have a download bandwidth of 2048kbps and upload speed of 512kbps. We should set

the policy as followed.

 Set the Per-User Bandwidth Control by “IP Segment”. The IP segment here has

address of 192.168.1.100 with subnet mask of 255.255.255.248. The available host

IP addresses will be 192.168.1.96 to 192.168.1.02. If you are not familiar with IP

subnet calculation, please use an on-line IP calculator. Here is an example link:

http://www.subnet-calculator.com/

 Set the uplink as 512kbps, downlink as 2048mbps

Step 1 Select the “Bandwidth Control” from the “Operation Mode->Setup” menu

Step 2 Once you have entered the Bandwidth Control menu, please follow the steps

below

1. Enable Bandwidth Control

2. Select “Per-User Bandwidth Control.