Manual

9. Application Example3: Routers and Repeater
AirLive WHA-5500CPE-NT User’s Manual
122
In this chapter, you will learn how to use Repeater mode and WISP Router mode in one
network example. In addition, some router settings such as how to setup virtual server will
also be demonstrated.
9.1 Application Environment
In the following application, the network is consisted of an Outdoor AP in the center, an
WHA-5500CPE-NT in WISP Router mode on the left, and a WHA-5500CPE-NT in
Repeater mode on the right.
WHA-5500CPE-NT in WISP Mode
 Make a wireless connection on the wireless WAN side to the Outdoor AP
 Use Site Survey wizard to establish connection
 Create a virtual server to LAN side FTP Server at 192.168.2.100
WHA-5500CPE-NT in Repeater Mode
 Repeat the signal from Outdoor AP. On the WHA-5500CPE-NT settings the Remote
AP’s SSID will be “Outdoor AP”
 On the wireless LAN side, the SSID will become “airlive”
9
9. Application Example 3:
Router and Repeater
SSID: OutdoorAP
Encryption:
WPA-PSK
192.168.1.100
192.168.1.254
192.168.1.1
FTP Server:
192.168.2.100