Manual

10. Emergency Firmware Recovery
133 AirLive WHA-5500CPE-NT User’s Manual
8. Power on the WHA-5500CPE-NT again. If firmware crashed, the device will scan the
192.168.1.254 for TFTP server and read the tftp upload file.
9. Wait for about 20 seconds, a pop-up window shows the firmware repair progress
screen.(Shown as Fig. 3)
Fig.. Tftpd32 show at the beginning of firmware repair progress.
Do not power off the PC or the WHA-5500CPE-NT during this
process! Any disconnection or interruption can damage the
WHA-5500CPE-NT permanently.
10. Device will continue proceeding. If you click on the “log viewer” of tftpd32, you can see
progress of work shown as Fig. 4.
Fig. 4 Repair progress shown in tftpd32 syslog Log viewer
11. Please wait for 5 minutes for the device to reboot. When finish rebooting, the wireless
LED will be on. The device can then be accessed again at 192.168.1.1. If the
WHA-5500CPE-NT’s not accessible after 5 minutes, please power reboot the
WHA-5500CPE-NT.
12. Open your web browser and type “192.168.1.1” to confirm the WHA-5500CPE-NT is
restored.