Manual

3. Configuring the WHA-5500CPE-NT
17 AirLive WHA-5500CPE-NT User’s Manual
3.2 Prepare your PC
The WHA-5500CPE-NT can be managed remotely by a PC through either the wired or
wireless network. The default IP address of the WHA-5500CPE-NT is 192.168.1.1 with a
subnet mask of 255.255.255.0. This means the IP address of the PC should be in the
range of 192.168.1.2 to 192.168.1.254.
To prepare your PC for management with the WHA-5500CPE-NT, please do the following:
1. Connect your PC directly to the LAN port on the DC Injector of WHA-5500CPE-NT
2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
You are ready now to configure the WHA-5500CPE-NT using your PC.
3.3 Management Interface
The WHA-5500CPE-NT can be configured using one the management interfaces below:
Web Management (HTTP): You can manage your WHA-5500CPE-NT by simply
typing its IP address in the web browser. Most functions of WHA-5500CPE-NT can
be accessed by web management interface. We recommend using this interface for
initial configurations. To begin, simply enter WHA-5500CPE-NT’s IP address (default
is 192.168.1.1) on the web browser. The default username and password are both
“airlive”.