Manual

3. Configuring the WHA-5500CPE-NT
19 AirLive WHA-5500CPE-NT User’s Manual
Command Line Interface (Telnet): WHA-5500CPE-NT can be managed through
the command line interface (CLI). It is possible to write a text script file, and then
paste it into the CLI to execute several commands at once. However, Telnet does
not encrypt its message. Therefore, it is not secure. The default Telnet
management port is TCP port 23.
To use the CLI, please open the command line window. Then type “telnet
192.168.1.1” to start.
When asked for password, please enter “airlive”.
To get a list of available command and their usage, please type “help” on the
command prompt.
3.4 Introduction to Web Management
The WHA-5500CPE-NT offers both normal (http) and secured (https) Web Management
interfaces. Their share the same interface and functions, and they can both be accessed
through web browsers. The only difference is HTTPS are encrypted for extra security.
Therefore, we will discuss them together as “Web Management” on this guide.
If you are placing the WHA-5500CPE-NT behind router or firewall, you might need to open
virtual server ports to WHA-5500CPE-NT on your firewall/router
 HTTP: TCP Port 80
 HTTPS: TCP/UDP Port 443
For more information about Telnet configuration, please go to Chapter 6
Command Line Interface.