Manual

3. Configuring the WHA-5500CPE-NT
25 AirLive WHA-5500CPE-NT User’s Manual
Follow the example below to change to “Client Infrastructure” mode
1. Select “Client Infrastructure” mode.
2. Click on “change mode” button
3. The AP will reboot, wait for about one minute
3.5.2 Change the Device’s IP Address
The default IP address is at 192.168.1.1. You should change it to the same subnet as
your network. Also, if you want to manage WHA-5500CPE-NT remotely, you have to set
the Gateway and DNS server information.
To setup the IP settings for WHA-5500CPE-NT, please select “System Configuration” ->
Device IP Settings”. After entering the IP information, click on “Apply” to finish.
2
1