Manual

4. Web Management-Wireless and WAN Settings
49 AirLive WHA-5500CPE-NT User’s Manual
Configure the WMM QoS Parameters
 AC Type
The queue and associated priorities and parameters for transmission are as follows:
 Data 0 (Best Effort, BE): Medium priority queue, medium throughput anddel ay.
Most traditional IP data is sent to this queue.
 Data 1 (Background, BK): Lowest priority queue, high throughput. Bulk data
that requires maximum throughput and is not time-sensitive is sent to this queue
(FTP data, for example):
 Data 2 (Video, VI): High priority queue, minimum delay. Time-sensitive data
such as Video and other streaming media are automatically sent to this queue.
 Data 3 (Voice, VO): Highest priority queue, minimum delay. Time-sensitive
data such as Voice over IP (VoIP) is automatically sent to this queue.
Packets in a higher priority queue will be transmitted before packets in a lower
priority queue.
 ECWmin and ECWmax
If an access point detects that the medium is in use, it uses the DCF random backoff