Manual

4. Web Management-Wireless and WAN Settings
AirLive WHA-5500CPE-NT User’s Manual
52
4.2.17 RADIUS Settings
Operation Mode -> Setup -> RADIUS Setting
RADIUS servers provide centralized authentication services to wireless clients. Two
RADIUS servers can be defined: one acts as a primary, and the other acts as a secondary
backup. If you choose to use 802.1x, WPA, or WPA2 as security policy, you might need to
set the RADIUS server settings.
To Enable RADIUS Server:
 Server IP: The IP address of the RADIUS server.
 Port Number: The port number that your RADIUS server uses for authentication. The
default setting is 1812.
 RADIUS Type: RADIUS
 Shared Secret: This is used by your RADIUS server in the Shared Secret field in
RADIUS protocol messages. The shared secret configured in the WHA-5500CPE-NT
must match the shared secret configured in the RADIUS server. The shared secret can
contain up to 64 alphanumeric characters.
 RADIUS Server Reattempt Period: The number of times the WHA-5500CPE-NT
should attempt to contact the primary server before giving up