Manual

6. Command Line Interface
85 AirLive WHA-5500CPE-NT User’s Manual
hello 00-4f-62-24-12-34
 show radius server
 Purpose: Show radius server settings
 Example:
Command> show radius server
RADIUS Server State IP/Port
----------------------------------------------------------------------------------------
Primary Disabled 0.0.0.0/1812
Secondary Disabled 0.0.0.0/1812
RADIUS Server reattempt: 60 seconds
 show radius server <primary | secondary>
 Purpose: Show settings of primary or secondary radius server
 Example:
Command> show radius server primary
RADIUS Server: primary
State: Disabled
Server IP: 0.0.0.0
Port Number: 1812
Shared Secret:
 show log level
 Purpose: show log level
 Example:
Command> show log level
Log level is 8
 show telnet / system
 Purpose: show telnet management information and system status
 Example:
Command> show telnet
Telnet session timeout: 0 minutes
Telnet port number: 23
Telnet state: enable