Manual

6. Command Line Interface
AirLive WHA-5500CPE-NT User’s Manual
90
 set client isolation <enable | disable>
 Purpose: Enable or Disable client isolation / privacy seperator
 Example:
Command> set client isolation disable
Set client isolation disable successful!
 set operation mode <AP |repeater| client | ad-hoc |bridge_infra|
wds_bridge | wisp | router>
 Purpose: set or change operation mode
 Example:
Command> set operation mode AP
Operation mode is already setting!
Command> set operation mode wds_bridge
System should be reboot...
Are you sure ? ( y/n ) : y
 set <wan | lan> <webservice | ping> <enable |disable>
 Purpose: enable/disable ping response or web server on the lan/wan side
 Example:
Command> set lan ping enable
set lan ping already enable
 set lan ip <ipaddress> sm <netmask> gw <gateway> dns <dns server>
 Purpose: set LAN IP address such as IP, Subnet mask, gateway, and DNS
server
 Example:
Command> set lan ip 192.168.1.1 sm 255.255.255.0 gw 192.168.1.254 dns
168.95.1.1
killall: dnsmasq: no process killed
LAN IP address : 192.168.1.1
Netmask : 255.255.255.0
Gateway : 192.168.1.254