Manual

6. Command Line Interface
93 AirLive WHA-5500CPE-NT User’s Manual
Command> set age out time 5
Radio1 age out time: 5
 set transmit power <range: 0-24>
 Purpose: To set the TX output power value of the radio
 Example:
Command> set transmit power 20
Radio1 transmit power: 20
 set data rate <best | 6~54>
 Purpose: To set the date rate. For example, 54mbps, 36mbps….etc
 Example:
Command> set data rate 54
Radio1 data rate: 54
 set acktimeout <11A>
 Purpose: To set the ACK timeout value
 Example:
Command> set acktimeout 25
AckTimeOut for radio1: 11A=25
 set vlan for ssid <enable | disable>
 Purpose: Enable VLAN function
 Example:
Command> set vlan for ssid enable
 set diffserv marking <enable | disable>
 Purpose: To enable diffserv marking function in multiple SSID & VLAN
configuration.
 Example:
Command> set diffserv marking enable
 set security <ssid> none
 Purpose: To remove security policy from a SSID
 Example:
Command> set security airlive none
Set Radio1 no security !