User guide

AirLive WIAS-1200G
User’s Guide
29
4.1.5 LAN3 & LAN4 Configuration
In this section, set the related configuration for LAN3/LAN4 port and DHCP server.
y LAN3 & LAN4 Port
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the LAN3 & LAN4 port.
Subnet Mask: Enter the desired subnet mask for the LAN3 & LAN4 port.
y DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red asterisks are required to be filled in.