User guide

AirLive WIAS-1200G
User’s Guide
44
4.2.1.2 Authentication Method – POP3
Choose “POP3” in the Authentication Method field, the hyperlink beside the pull-down menu will become “POP3
Setting”.
Click the hyperlink for further configuration. Enter the related information for the primary server and/or the secondary
server (the secondary server is not required). The blanks with red star are necessary information. These settings will
become effective immediately after clicking the Apply button.
y Server IP: Enter the IP address/domain name given by your ISP.
y Port: Enter the Port given by the ISP. The default value is 100.
y Enable SSL Connection: If this option is enabled, the POP3 protocol will perform the authentication.
4.2.1.3 Authentication Method – Radius
Choose “Radius” in the Authentication Method field, the hyperlink beside the pull-down menu will become
“Radius Setting”.
Click the hyperlink for further configuration. The Radius server sets the external authentication for user accounts.
Enter the related information for the primary server and/or the secondary server (the secondary server is not
required). The blanks with red star are necessary information. These settings will become effective immediately after
clicking the Apply button.