WLA-5200AP 802.
Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product 802.11a/b/g Multi-function Wireless Access Point WLA-5200AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description ■ EN 301 893 v1.2.3 (2003-08) Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential requirements of Article 3.
WLA-5200AP CE Declaration Statement Country cs Česky [Czech] Declaration da Dansk [Danish] Undertegnede OvisLink Corp. erklærer herved, at nl følgende udstyr WLA-5200AP overholder de Nederlands [Dutch væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. mt Hiermit erklärt OvisLink Corp., dass sich das Gerät WLA-5200AP in Übereinstimmung mit den Malti [Maltese] grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents INTRODUCTION ..........................................................................................................1 FEATURES ..................................................................................................................1 APPLICATION ..............................................................................................................2 PARTS NAMES AND FUNCTIONS ...................................................................................
INTRODUCTION AirLive WLA-5200AP is an IEEE802.11a/b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Access Point. The Wireless Access Point is equipped with two 10/100 M Auto-sensing Ethernet ports for connecting to LAN and also for cascading to next Wireless Access Point. This Access Point provides 64/128bit WEP encryption, WPA and IEEE802.1x which ensures a high level of security to protects users’ data and privacy.
Application Example 1 Example 2 2 WLA-5200AP v2 User’s Manual
Parts Names and Functions 1. Front Panel: (LED Indicators) LED Status Indicator Color Solid Flashing Power Yellow Turns solid green N/A. when the power is applied to this device. Receiving/ LAN1, Yellow Turns solid Yellow Sending data LAN2 when the Ethernet cable is connected the LAN port. Wireless Yellow Turns solid Yellow Receiving/ Sending data when the power is applied to this device. Table 1: LED Indicators 2.
Port/button LAN ports (LAN1,LAN2) (Factory) RESET 12V DC Functions Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. If required, any port can be connected to another hub. Any LAN port will automatically function as an "Uplink" port when necessary. Press over 3 seconds to reboot this device. Press for over 10 seconds to restore factory settings. Performing the Factory Reset will erase all previously entered device settings.
HARDWARE CONNECTION Note: Before you starting hardware connection, you are advised to find an appropriate location to place the Access Point. Usually, the best place for the Access Point is at the center of your wireless network, with line of straight to all your wireless stations. Also, remember to adjust the antenna; usually the higher the antenna is placed, the better will be the performance. 1.
ABOUT THE WIRELESS OPERATION MODES This device provides seven operational applications with AP, Bridge, Client (Ad-hoc), Client (Infrastructure) ,WDS Repeater, Universal Repeater , WISP(Client Router) mode which are mutually exclusive. This device is shipped with configuration that is functional right out of the box.
Client Mode (Infrastructure) If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a computer so that the computer can send packets from wired end to wireless interface. To set the operation mode to Client (Infrastructure), please go to “Wireless JBasic Settings”, in the “Mode” field click the down arrow b to select Client mode, and then select “Network Type” as “Infrastructure”.
Bridge Mode You will be able to connect two wireless LANs together under the Bridge mode. This only works with another Wireless a/b/g Access Point. If enabled you must enter the MAC address of that Wireless a/b/g Access Point. To set the operation mode to Bridge mode, please go to “Wireless JBasic Settings”, in the “Mode” field click the down arrow b to select Bridge mode.
WDS Repeater Mode A repeater's function is to extend the wireless coverage of another wireless AP or router. For WDS repeater to work, the remote wireless AP/Router must also support WDS function.
Universal Repeater Mode A universal repeater can also extend the wireless coverage of another wireless AP or router without requiring the remote device to have WDS function. Therefore, it can work with almost any wireless device.
WISP (Client Router) Mode WISP (Client Router) mode In WISP mode, the AP will behave just the same as the Client mode for wireless function. However, router functions are added between the wireless WAN side and the Ethernet LAN side. Therefore, the WISP subscriber can share the WISP connection without the need for extra router.
CONFIGURATION Login 1. 2. 3. 4. Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point. Make sure your wired station is set to the same subnet as the Wireless Access Point, i.e. 192.168.1.254 Start your WEB browser. In the Address box, enter the following: http://192.168.1.254 Enter airlive in the Username and password column when you are prompted the login screen.
System System Product Model Firmware Version Shows the product model name. The current version of the firmware installed in this device. Shows the firmware date. Firmware Date The SSID differentiates one WLAN from another, Loader Version therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID.
Active Client Shows the information of the devices that are currently associating with this Wireless Access Point. Wireless Mode Wireless mode This page includes all wireless mode settings and major parameters. When you choose each wireless mode that will cause the device to reboot for the new wireless mode take effect.
AP modes The distinguishing name of this device, you may change the default alias name by entering a new one in this column.
Band SSID Channel Number in the network you are located. In other words, this device will not be visible by any wireless station. Choose a mode from the pull-down list. • 11b/g mixed: Select to allow both wireless-b and wireless-g devices on the network. • 11B only: Select to allow only wirelessB devices on the network. • 11G only: Select to allow only wirelessG devices on the network. • 11A (indoor): Select to allow only wireless-A devices on the indoor network.
Client Mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Disable Wireless LAN Check the box to disable the Wireless LAN Interface, by so doing, you won’t be able to Interface make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. Choose a mode from the pull-down list.
Network Type SSID Channel Number network. You can choose the Ad-Hoc mode and Infrastructure mode The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network.
Fragment Threshold RTS Threshold Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network. If your 802.11g Wireless LAN PC Card often transmit large files in wireless network, you can enter new Fragment Threshold value to split the packet. The value can be set from 256 to 2346. The default value is 2346. RTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem.
Point, informing that it is going to transmit the data. Upon receipt, the Access Point will respond with a CTS message to all station within its range to notify all other stations to defer transmission. It will also confirm the requestor station that the Access Point has reserved it for the time-frame of the requested transmission. If the “Hidden Node” problem is an issue, please specify the packet size. The RTS mechanism will be activated if the data size exceeds the value you set..
Enable Watch Watch Interval Watch Host Apply Change Reset Dog Check the box to enable this watch dog function and set the Watch dog time Interval (1~60 mins) and type the ip address of the host ip Press to save the new settings on the screen. Press to discard the data you have entered since last time you press Apply Change. Security (AP/Client/WISP Mode) Here you can configure the security of your wireless network. Selecting different method will enable you to have different level of security.
Authentication Type: WPA-PSK/WPA2-PSK If WPA-PSK/WPA2-PSK is selected, users will have to select the Encryption from the pull-down list, TKIP, AES or TKIP_AES and then enter a passphrase.
Bridge Mode Setting The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Disable Wireless LAN Check the box to disable the Wireless LAN Interface, by so doing, you won’t be able to Interface make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. Choose a mode from the pull-down list.
Channel Number Allow user to set the channel manually or automatically. If set channel manually, just select the channel you want to specify. If “Auto” is selected, user can set the channel range to have Wireless Access Point automatically survey and choose the channel with best situation for communication. The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel.
RTS Threshold wireless network. If your 802.11g Wireless LAN PC Card often transmit large files in wireless network, you can enter new Fragment Threshold value to split the packet. The value can be set from 256 to 2346. The default value is 2346. RTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem. “Hidden Node” is a situation in which two stations are within range of the same Access Point, but are not within range of each other. Therefore, they are hidden nodes for each other.
Data Rate Preamble Type Hide SSID whether there are buffered frames at the access point). By default, the unit adaptively selects the highest possible rate for transmission. Select the basic rates to be used among the following options: Auto, 1, 2, 5.5, 11or 54 Mbps. For most networks the default setting is Auto which is the best choice. When Auto is enabled the transmission rate will select the optimal rate.
Security (Bridge/Repeater Mode) Here you can configure the security of your wireless network. Selecting different method will enable you to have different level of security. Please note that by using any encryption, by which data packet is encrypted before transmission to prevent data packets from being eavesdropped by unrelated people, there may be a significant degradation of the data throughput on the wireless link.
Authentication Type: WPA-PSK/WPA2-PSK If WPA-PSK/WPA2-PSK is selected, users will have to select the Encryption from the pull-down list, TKIP, AES or TKIP_AES and then enter a passphrase.
Authentication RADIUS Type: Open System with 802.1x/WPA-RADIUS/WPA2- If the Open System with 802.1x/WPA-RADIUS/WPA2-RADIUS is selected, users will have to select the Encryption from the pull-down list, TKIP, AES or TKIP_AES and configure a RADIUS server, the RADIUS Server will proceed to check the 802.1x Authentication. Only the Open System with 802.
WDS Control WDS MAC Table Create You may enter up to 20 characters as a remark to the Device Comment previous MAC Address. Enter the MAC Address of a station that is allowed to Device MAC access this Access Point.
Repeater Mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Disable Wireless LAN Check the box to disable the Wireless LAN Interface, by so doing, you won’t be able to Interface make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station.
network. 11A (outdoor): Select to allow only wireless-G devices on the network. • 11A (indoor): Select to allow only wireless-A devices on the outdoor network. The SSID differentiates one WLAN from another; SSID therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID.
Policy Choose Device Comment Device MAC Add Remove Reset Close Select the Access Control Mode from the pull-down menu. Disable: Select to disable Wireless Access Control Mode. Allow: Only the stations shown in the table can associate with the AP. Reject: Stations shown in the table won’t be able to associate with the AP. You may enter up to 20 characters as a remark to the previous MAC Address. Enter the MAC Address of a station that is allowed to access this Access Point.
WISP mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Disable Check the box to disable the Wireless LAN Interface, by so Wireless LAN doing, you won’t be able to make wireless connection with this Access Point in the network you are located. In other words, this Interface device will not be visible by any wireless station. Choose a mode from the pull-down list.
Network Type SSID Channel Number Advance Settings Security Site Survey You can choose the Ad-Hoc mode and Infrastructure mode The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID.
Virtual Server Define virtual server ip address and port range, Protocol and check the box to enable virtual server, The Virtual server which using single port number can be accelerated by hardware at wirespeed Special Application You can define special application that can allow outside users to access your internal application behind this AP, like QuickTime ,MSN gaming zone… DMZ DMZ settings will not be worked until WAN have connected 36 WLA-5200AP v2 User’s Manual
Remote Mangement You can enable the Remote management function and define the port number let can be managed from internet .
Alias Name You can set the alias name for this device (not exceeding 32 characters). Disable Check the box to disable the Wireless LAN Interface, by so doing, you won’t be able to make wireless connection with this Access Wireless Point in the network you are located. In other words, this device will LAN not be visible by any wireless station. Interface Band You can choose one mode of the following you need. • 11b/g mixed: Select to allow both wireless-b and wireless-g devices on the network.
Site Survey Security Click site survey setup button that will shows the WISP Outdoor AP list and you can select which WISP AP you want to connect . Please refer the AP mode settingsÆ Security for details, This setting used Wireless client or remote AP to link this device. Advance Setting Please refer the AP mode settingsÆ Advance Setting for details. Access Control WAN Port Please refer the AP mode setting Æ Access Control for details.
Special Application You can define special application that can allow outside users to access your internal application behind this AP, like QuickTime ,MSN gaming zone… DMZ DMZ settings will not be worked until WAN have connected Remote Mangement You can enable the Remote management function and define the port number let can be managed from internet 40 WLA-5200AP v2 User’s Manual
TCP/IP Basic In this page, you can change the TCP/IP settings of this Access Point, select to enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address. IP Address Subnet Mask Default Gateway DNS DHCP DHCP Client Range Show Client Clone MAC Address This field can be modified only when DHCP Client is disabled. If your system manager assigned you static IP settings, then you will have to enter the information provided. Enter the information provided by your system manager.
Apply Changes Reset Press to save the new settings on the screen. Press to discard the data you have entered since last time you press Apply Change. Other Upgrade Firmware 1. Download the latest firmware from your distributor and save the file on the hard drive. 2. Start the browser, open the configuration page, click on Other, and click Upgrade Firmware to enter the Upgrade Firmware window. Enter the new firmware’s path and file name (i.e. C:\FIRMWARE\firmware.bin).
This function enables users to save the current configurations as a file (i.e. config.bin) To load configuration from a file, enter the file name or click Browse… to find the file from your computer.anc click update button . Factory Default: Click to restore the default configuration. System Restart Click to restart the device. Region Settings You can select your country region : Europe, America, South America Note !! Select the Country Region will affect the each Channel number of each Wireless mode.
User Name Password Confirm Password Apply Set your new User name. User name can be up to 15 characters long. User name can contain letter, number and space. It is case sensitive. Set your new password. Password can be up to 15 characters long. Password can contain letter, number and space. It is case sensitive. Re-enter the new password for confirmation. Press to save the new settings on the screen.