Manual

AirLive WN-151ARM User’s Manual

Options

802.11 Mode

Select the desired mode:

• Off - Wireless function is off.

• 11b only – this device will only allow 802.11b wireless network clients

to connect to it. (Maximum transfer rate is 11Mbps)

• 11g only –this device will only allow 802.11g wireless network clients

to connect to it. (Maximum transfer rate is 54Mbps)

• 11b + 11g – this device will only allow 802.11b and 802.11g wireless

network clients to connect to it.

• 11b/g/n – this device will allow 802.11b, 802.11g or 802.11n wireless

network clients to connect to it.

Channel No.

Select the Channel you wish to use for your wireless LAN.

• If you experience interference (shown by lost connections and/or slow

data transfers) please try to assign a different channel to avoid signal

collision.

• If using multiple Access Points, adjacent Access Points should use

different Channels to reduce interference.

Extension

Channel

This option will be selectable under the following conditions:

802.11 Mode: 11b+g+n

Bandwidth: 20MHz + 40MHz auto

Channel No.: Channel 5 ~ 9

40MHz spectrum transmission will use up to 5 wireless channels, therefore,

between channel 5 ~ 9, you can choose “Up channel” or “Down channel”.

For example, channel 5 and up channel is selected, which means the

wireless spectrum transmission will use channel 1 ~ 5.

Isolation

between SSID

If Enabled, SSID1 and SSID2 will be isolated and operating independently.

SSID1 users and SSID2 users will not be able to see each other.

WMM Support

Wi-Fi Multi Media (WMM) enhances the data transfer performance of

multimedia contents when they’re being transferred over a wireless

network.

Note: This function can only be available when client’s wireless card also

supports WMM feature.

Bandwidth

Select the desired bandwidth from the list.

Note: Do not modify the default value if you aren’t familiar with this function.