Manual

3. Making Configuration
65 AirLive WN-220R User’s Manual
z Static Routing:
For static routing, you can specify up to 8 routing rules. You can enter the destination IP
address, subnet mask, gateway, and hop for each routing rule, and then enable or disable
the rule by checking or unchecking the Enable checkbox.
¾ Example:
Configuration on NAT Router
Destination SubnetMask Gateway Hop Enabled
192.168.1.0 255.255.255.0 192.168.123.216 1 ˇ
192.168.0.0 255.255.255.0 192.168.123.103 1 ˇ
So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use
the above table to determine that it had to go via 192.168.123.103 (a gateway), and if it
sends Packets to 192.168.1.11 will go via 192.168.123.216
Each rule can be enabled or disabled individually.
After routing table setting is configured, click the Save button.