USER MANUAL Model: YPH-12H -S1 PORTABLE AIR-CONDITIONER Thank you for selecting super quality air conditioner. Please be sure to read this manual carefully before using it. Any question, please contact the professional for help.
CONTENTS CONTENTS……………………………………………………………1 IMPORTANT SAFEGUARD…………………………………………2 FEATURES AND PARTS LIST………………………………………3 CONTROL PANEL……………………………………………………4 REMOTE CONTROL…………………………………………………6 OPERATION METHODS……………………………………………..8 INSTALLATION……………………………………………………….10 WATER & DRAINAGE METHODS…………………………….…..13 MAINTENANCE………………………………………………………14 TROUBLE SHOOTING………………………………………………15 INSTALLATION ACCESSORIES…………………………………...16 APPENDIX……………………………………………………………..
IMPORTANT SAFEGUARDS Read all instructions for the safety of yourself and your family. ＊Keep the unit on a flat and dry place. Leave at least 50cm space all around the unit. ＊Installation suits to national electrical net layout rules. ＊After installation, please check if the plug is perfect and firmly insert in the jack. ＊Keep the air inlet and outlet ventilation open. ＊Keep the appliance far from gas or other inflammable liquids.
FEATURE AND PARTS LIST Feature ＊No installation is required. ＊Easily moved . The handle makes moving more convenient. ＊Totally luxury panel and modern appearance design. ＊LCD Blue screen display． ＊Water-cooled mode and adding water mode is most energy saving and environmental protecting. ＊Low noise and strong wind. ＊Auto swing makes wind blow from left to right automatically. ＊Three-minute restart delay to protect compressor. Parts list: 1. Control panel 1 4 2 2. Horizontal louver 5 3 3.
CONTROL PANEL CAUTIONS: If the unit is turned off in cool mode and started immediately, it will wait at least 3 minutes before running. 图3 1. Buttons ON/OFF：Press this button to turn on/off the unit. Mode: Press this button to select mode. Up/down: Press up or down button to set temperature or adjust time in Timer mode. Press both buttons to exchange Celsius to Fahrenheit or vice versa. Swing: press this button to make the vertical louver swing automatically. Press it again, the swing will stop.
2.LCD display ：Cool mode indicator. ：Dehumidifying mode indicator ： Fan mode indicator, also it inner-dehumidifying mode is chosen. will flash when ：Heating mode indicator ：Water Full indicator. ：Set temperature under cooling mode or room temperature under fan mode. TEMP means temperature, ℃ means centigrade, and ℉ means Fahrenheit. When 88 is E2, it means room temperature sensor faulty; When 88 is E3, evaporator sensor faulty; When 88 is df, the cooling system is defrosting or anti-foresting..
REMOTE CONTROL 1．Button instruction Up/Down Mode When unit is on or under Timer Mode, press this key to choose cooling, heating, dehumidifying or fan Press temperature will increase 1℃or1℉ ， temperature press will decrease 1℃or 1℉。 Or adjust time under timer Mode Fan Press this to choose fan speed (low, middle or high). When the unit is turned on at first time, the default speed is low Power Button Press this button to turn on/off the unit. Swing Button Press this button to control swing function.
2. Symbol instruction: (1).Mode From up to down, it is cooling, heating, dehumidifying and fan mode, press Mode key to set. The default is Fan, when the unit is on first time. (2). Signal It flashes when signal’s sent out. (3).Economic It appears when it is under economic mode, and disappears when the mode’s cancelled. (4).Swing It appears when the Swing is on, and disappears when Swing is off. The default is on. (5).
(3) Temperature tolerance：±1℃or ±1℉； (4)Temperature range:18-30℃/64-86℉。 OPERATION METHODS Timer set 1. Set timer-off Press the Timer button when the unit is on. The screen will flash “-“ five times. During this period, press Up or Down button to adjust set time (range: 0.5h to 24h). After time is set, if press once in the first 3 hours, the set time only increases or decreases 0.5h, if after 3 hours, the set time will increase or decrease 1h. The set time will flash 5 times after adjusting.
or decrease 1℃ or 1°F by pressing . ＊Press Speed button to choose a proper fan speed. ＊ Press Econ in the cooling and heating mode, the set temperature is “27℃/ 80℉” under cooling mode, “23℃/ 73℉” under heating mode, and fan speed is low. If want to change temperature or speed, please Econ again to cancel.. ＊Press Swing button to adjust the direction of vertical louver. ＊Adjust horizontal louver manually. 2.
INSTALLATION 1. Selection of Installation Place Please install the unit where is flat and dry. Leave at least 50cm space all around the Unit (when the hose is not connected). (Fig.5) 2. Air Exhaust Duct Mounting Method 1) Fix the square end of the exhaust dust to the exhaust terminal of the unit. (Fig.6) 2) Put the other end (discharge) to the nearest window. Leave at least 50cm place around it.
The window kit is designed to fit most standard vertical and horizontal windows. However, it may be necessary for you to modify in some aspects of the installation procedures for certain Vertical Window Horizontal Window Window Kit Size: Min Size:90cm Max Size:130cm Window Kit Size: Min Size:90cm Max Size:130cm Fig 8 Fig 7 types of windows. Please refer to the illustrations. (Fig.7 and Fig.8) 4.
2) Correct bending θ≤45° Fig 10 θ≤45° Fig 11 3) Wrong bending Fig 12 - - 12 - -
Adding and Draining Water Adding water ＊The condensing water is recycled to improve efficiency through cooling condenser. Also it will lower the noise and save energy. ＊When the condensing water is not enough for pumping, the water Injection indicator on the control panel will illuminate, you’d better inject some water into the water draw, right of the handle, there is a cover. Meanwhile, pay attention the water level pole at your right, where show the water quantity.
MAINTENANCE Cleaning Turn off the unit and pull the plug out of the socket before cleaning. 1. Clean the surface Clean the surface of the unit with a duster or a half-wet soft cloth. Do not use chemical solvent like benzene, alcohol, gasoline, etc., otherwise the surface may be damaged or even deformed. 2. Clean the air filter If the air filter is blocked with a lot of dust, the efficiency will be reduced. You’d better Clean the filter every two weeks. 1) Pull out the air filter as Fig.15.
TROUBLE SHOOTING Before contacting the professional, please first check it yourself referring to the followings. Trouble Check Solution Is power fail? Is plug out? The unit doesn’t Is power fuse or switch off? operate at all. Is the set time suitable? Is water full alarm on? It is normal. Insert the plug into the socket steadily. Change the fuse or switch on. Change the set time. Pour the water. Is air inlet or outlet blocked? Clear off the blocks. Is there any other heat source in Move the heat source.
INSTALLATION ACCESSORIES Flexible exhaust hose with adapters…………………………….1/set Stretch from 28cm up to 150cm Square connector…………………………………………………..1 pc Flat and round connector…………………..………………………1 pc Adjustable window slider kit….…………………………………….1/set Stretch from 90cm 130cm Screw (the length is 10mm)…………………………………………...1 pc Plug (square)………………………………………………………....
APPENDIX Fuse Parameter Type: FSD Voltage: 250V Current: 3.15A Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
