Isolator Shield for NanoBeam® Models: ISO-BEAM-16 ISO-BEAM-19
IsoBeam™ Compatibility IsoBeam Compatible NanoBeam Models ISO-BEAM-16 NBE-M5-16, NBE-5AC-16 ISO-BEAM-19 NBE-M2-13, NBE-M5-19, NBE-5AC-19 Package Contents Isolator Shield for NanoBeam® Models: ISO-BEAM-16 ISO-BEAM-19 IsoBeam Shield IsoBeam Ring Quick Start Guide Installation 1. Align the bubble level and port of the NanoBeam with the openings of the IsoBeam Shield, and then insert the NanoBeam into the IsoBeam Shield.
2. Align the tabs of the IsoBeam Ring with the slots of the IsoBeam Shield. Insert the IsoBeam Ring into the IsoBeam Shield until the tabs lock into the slots. 3. Insert the ball joint mount into the NanoBeam.
. Insert the lock ring into the NanoBeam. 5. Turn the lock ring to secure the ball joint mount to the NanoBeam. Online Resources Support support.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com ©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, IsoBeam, and NanoBeam are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.