USER MANUAL Air Purifier 400S/400/300S/300
Feature Highlights The following features are available for our Airmega Air Purifier. Real-time Air Quality Monitoring Airmega’s pollution sensor tells you the indoor air quality in real-time. The brightly colored LED ring lets you know if your indoor air is fresh or unhealthy every minute of the day. ▶ P. 23 Smart Mode AUTO With Smart Mode, Airmega adapts to its surroundings. Fan speeds automatically adjust based on the room’s air quality and room conditions. ▶ P.
Quick Start Guide Before operating the product, you must remove the plastic wrapping of the inserted Max2 filters on both sides. For details, see page 14. Do not operate the product until completing these steps first.
Connecting the Air Purifier to the Wi‐Fi Network (400S/300S only) Before connecting the air purifier and your smart phone, you must first download the Airmega App from Apple App Store or Google Play Store. For more details, see page 16. 2 4 ** 3 1 AIRMEGA * * Advanced Settings to enter the static IP address 8 6 5 7 A B For Android users For Android, step 4, 5, and 6 will be proceeded automatically. 4 If the connection is completed successfully, the [Wi-Fi] indicator will be on.
Table of Contents 01 BEFORE USING THE PRODUCT______________________________________ 6 6 6 6 EN Symbols Used in This Manual Illustrations Used in This Manual Safety Instructions 02 PREPARATION______________________________________________________ 8 Checking the Product Parts Diagram 8 9 03 INSTALLATION_____________________________________________________ 14 Setting Up the Product Connecting the Power and Turning On the Air Purifier Connecting the Air Purifier to the Wi‐Fi Network (400S/300S only) 14 1
01 BEFORE USING THE PRODUCT Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Warning indicates a potentially hazardous situation that may result in death or severe injury to the user or others. CAUTION Caution indicates a potentially hazardous situation that may result in injury to the user or others, or the loss of property.
• Remove the power plug from the electric outlet by grasping the power plug and pulling it gently. Never pull the cord to remove the power plug. • Do not use an adapter or extension cord, as it may cause fire, shock, or personal injury. • Do not repair the product unless this manual recommends it. Doing so will void your warranty. All repair work must be carried out by a qualified technician. • Exercise caution while removing the components from the product.
02 PREPARATION Checking the product Before installing the air purifier, make sure all of the components are present. If any items are missing or damaged, contact the customer service center. Max2 Filter* Main Unit Pre-filter* Max2 Filter* Pre-filter* User Manual Certificate of Performance * These are installed in the main unit. Pre-filter Captures large particles like hair, fur, and dust by micro mesh.
Parts Diagram Check the parts of the product (exterior in the front and top view and control panel) and how they function. Exterior Check the parts and functions of the exterior of the product. EN Air quality indicator This shows the air pollution level around the product in real time. The color changes depending on the pollution level. Handles (left, right) Hold these handles to lift or transport the air purifier. Covers (left, right) Open these covers when cleaning or replacing the filters.
02 PREPARATION Checking the product Control Panel (400S/400) 400S [Wi-Fi] button/indicator Touch this button to connect to a Wi-Fi network. When the Wi-Fi connection is completed, the indicator is turned on. * The status of Wi-Fi LED : - Blinking : Not connected yet or in the pairing process - Constant LED: Wi-Fi connected - LED off: Wi-Fi off [Light] button Touch this button to turn the air quality indicator and light on or off.
EN [Power] button Touch this button to turn the product on. Touch and hold this button for 2~3 seconds to turn the product off. Air speed/mode selection control Touch the sensor to select the air speed or set the product to Smart mode or Sleep mode.
02 PREPARATION Checking the product Control Panel (300S/300) 300S [Wi-Fi] button/indicator Touch this button to connect to a Wi-Fi network. When the Wi-Fi connection is completed, the indicator is turned on. * The status of Wi-Fi LED : - Blinking : Not connected yet or in the pairing process - Constant LED: Wi-Fi connected - LED off: Wi-Fi off 300 [Timer] button/indicator Touch this button to automatically turn off after an hour, 4 hours, or 8 hours.
EN [Power] button Touch this button to turn the product on. Touch and hold this button for 2~3 seconds to turn the product off. [Air speed/mode] button Touch this button to select the air speed or set the product to Smart mode or Sleep mode.
03 INSTALLATION Setting Up the Product Before using the product, you must remove the plastic wrapping of the inserted Max2 filters on both sides. CAUTION Make sure that the power cord is unplugged before opening the covers. 2 1 Pre-filter Cover Remove the both sides of covers and filters in the following order. 2 Remove the plastic wrapping for Max2 filters on both sides. Covers ▶ Pre-filters ▶ Max2 filters Discard the plastic wrapping for Max2 filters.
Connecting the Power and Turning On the Air Purifier When your filters are prepared, connect the power and turn on the air purifier. CAUTION 1 Insert the power plug into a power outlet. 2 Touch the [Power] button to turn the air purifier on. EN This product is for 120 V~ 60 Hz use only. Make sure your power supply meets these requirements. The indicators on the air purifier will blink. You will hear a chime sound when the air purifier starts to operate.
03 INSTALLATION Connecting the Air Purifier to the Wi‐Fi Network (400S/300S only) If your product is a Wi-Fi enabled models you can connect the product to your Wi-Fi network for monitoring air quality and remotely operating the product using your smart phone application. Downloading the Airmega Application To use the Wi‐Fi function, you must first download and install the Airmega application to your smart phone. You can download the Airmega application from Apple App Store or Google Play Store.
2 2 Enter the password of Wi-Fi connection you are currently using, and then tap Next. If there is no password, tap Next without entering the password. 2 3 EN NOTE Tap Advanced Settings to enter the static IP address. 1 Enter your purifier’s serial number (=barcode number) on the back side of your product, and then tap Next. NOTE Tap Scan Barcode to read the barcode automatically. 1 4 Tap Next.
03 INSTALLATION Connecting the Air Purifier to the Wi‐Fi Network (400S/300S only) 5 Move to the Wi-Fi setting window and select Airmega 400S or 300S from the Wi-Fi options, and then return to the app. For Android users The Airmega selection window appears automatically. You can select Airmega 400S or 300S from the pop-up lists without moving to the Wi-Fi settings of your phone. A B 18 6 Wait until transmitting network information to your product is complete.
8 2 Enter a name for your product, and then tap Finish. When the connection of the air purifier and your smart phone is completed successfully, [Wi-Fi] indicator is on. If you encounter trouble and cannot proceed to the next, repeat the steps from the first one or verify your network environment. 9 4 EN NOTE 1 For Android users For Android, step 4, 5, and 6 will be proceeded automatically.
Screen Layout of Airmega App Air purifier name The name of product (This Setting can be changed in Setting.) Moves to the setting section. Pre-filter Wash Frequency/ Indoor AQI report Name/Time Zone/Warranty Quality Indicator report Smart Mode Sensitivity/ Moves to the indoor Air options are available. (24 hours, 7 days, 30 days, 12 months). Indoor AQI Fan speed Shows the real time indoor Shows the current air speed air quality at 4 stages. and selects the air speed.
04 OPERATION Smart Mode - Auto If the product is set to Smart mode, it automatically adjusts the air speed according to the current air quality around the product. The air speed is adjusted as shown in the table below: Air Quality Level 1 ( 400S/400 Touch the sensor for ) Moderate/unhealthy Level 2 ( ) Very unhealthy Level 3 ( ) EN Air Speed Good 300S/300 . Touch the [Air speed/mode] button repeatedly until is selected.
Smart Mode - ECO If the pollution level remains Good for more than 10 minutes when the product is set to Smart mode, the fan stops automatically to conserve energy. If the product detects air pollution, the fan will automatically restart. If the pollution level remains Good for more than 10 minutes in the smart mode, the fan stops automatically to save energy. If the product detects air pollution, the fan will automatically restart.
04 OPERATION Checking the Air Quality You can easily check the current air quality around the product using the air quality indicator on the front of the product.
05 MAINTENANCE Filter Maintenance and Cleaning Parts Clean the pre-filters and each part of the main unit and replace the Max2 filters regularly for optimum performance. The following tables show the recommended maintenance cycle for filters and cleaning cycle for each part.
05 MAINTENANCE Filter Maintenance and Cleaning Parts Pre-filter When the [Pre Wash] indicator is on, clean your pre-filters on both sides. Follow these instructions below to clean the filters. Cover Remove the both sides of covers and pre-filters. 2 Remove dust with a vacuum cleaner or water. Press two tabs at the top of the pre-filters and pull them outward to remove them from the product.
How to replace the Max2 Filter When the [Max2 Change] indicator is on, replace your Max2 filters on both sides. Follow these instructions below to replace the filters. 2 1 Pre-filter Cover Remove the both sides of covers and filters in the following order. 2 Remove the plastic wrapping for the new Max2 filters and discard it. Covers ▶ Pre-filters ▶ Max2 filters Discard the old Max2 filters. These are not reusable.
05 MAINTENANCE Filter Maintenance and Cleaning Parts Front, Right, and Left Covers Clean the front, right, and left covers frequently for optimum performance. Follow these instructions below to clean the covers. Remove the front, right, and left covers. · Lift and pull the upper part of front cover to remove it. · Pull the upper part of the right and left covers to remove them. 2 EN 1 1 2 3 1 2 Remove dust with a soft, dry cloth or brush.
Air Outlet Clean the air outlet frequently for optimum performance. Follow these instructions below to clean it. 2 1 Turn the air outlet cover counterclockwise and lift it. 2 Remove dust or any foreign objects from the air outlet. 1 CAUTION NT NE CE O Be careful not to allow any foreign objects and liquid to enter into the air purifier. 3 3 2 Align the ● mark on the cover and the ○ mark on the main unit, and turn the cover to ● mark on the main unit.
05 MAINTENANCE Filter Maintenance and Cleaning Parts Pollution Sensor Clean the pollution sensor approximately every 2 months for optimum performance. Follow these instructions below to clean it. 2 Lift and pull the upper part of front cover to remove it. 2 Hold the upper part of the pollution sensor cover and remove it. 3 Wipe the lens, dust inlet, and dust outlet with a dry cotton swab. EN 1 1 Dust inlet Lens CAUTION Do not use water.
06 APPENDIX Troubleshooting Before contacting the customer service center, please attempt the following solutions. All other servicing should be done by a Airmega authorized service center. No air comes out from air outlet. Check Is the power plug connected? Check Are all the indicators turned off? Solution Solution Check Solution Connect the power plug to an AC power outlet (120 V~ 60 Hz). Touch the [Power] button to turn on the product.
06 APPENDIX Specification The specification is subject to minor changes to improve the product performance. Item Coverage Filter Rated Voltage Power Weight Size (HWD) 400S (AP-2015E) 1,560 ft2 (145 m2)* 780 ft2 (72 m2)** 400 (AP-2015F) 300S (AP-1515G) 1,256 ft2 (117 m2)* 628 ft2 (58 m2)** 300 (AP-1515H) EN Model Name Specification Washable Pre‐Filter + Max2 filter set (Activated Carbon + Green True HEPA) 120 V~ 60 Hz 66 W 57 W 22.8 x 14.8 x 14.8 inch (58.0 x 37.6 x 37.6 cm) 20.1 x 13.
Limited Warranty 5-YEAR LIMITED WARRANTY 5-Year Manufacturer’s Limited Warranty Subject to the terms and conditions of this limited warranty, (“Coway”) warrants that the motor and electronic parts of the product will be free from manufacturing defects for a period of 5 years from the date of its original retail purchase. How Long Is The Coverage? This warranty is for a period of 5 years from the date of its original retail purchase.
MEMO EN 33
memo 34
MEMO memo EN 35
001 1216776 www.airmega.com 4221, Wilshire Blvd.
