Assembly Instructions

OPT1-M-104 Rev.01 Optimus-1 EX - FTS Mast Assembly Procedure

Page 21 of 33

4.3 FTS Electrical Assembly

4.3.1 Connecting the Antenna Electrical Cables

PLM ID

Description

QTY

Image

100266

CBL Assy N-TYPE PLUG LMR 400 6'

MM05114

CBL FTS 15m POE + Cable

Table 6 Parts list for antenna cables

Figure 15 Antenna types

 To connect the antennas to the FTS mast unit box, do the following:

1. Connect the cellular antenna cable LMR400 (PN: 100266) from the cellular antenna

(001238) to the "CELL MAIN" N TYPE connector (see Figure 16 and Figure 17).

2. Connect the LoRa antenna cable LMR400 (PN: 100266) from the LoRa antenna (001181)

into "FTS MAIN" N TYPE connector (see Figure 16 and Figure 17).

3. Add the CAT7 15m (EO05277) cable into the mast cable protection sleeve.

4. Connect the CAT7 15m (EO05277) from the mast panel connection (2J10) to the FTS

box POE + connector (see Figure 16 and Figure 17).

5. Connect the FTS ground cable into the mask ground bar.

LoRa

Antenna

Cellular

Antenna