User's Manual

continuous mode, CW, the channel is always keyed and continuously transmitting. In the carrier
detect mode, CD, the channel is keyed only when the incoming signal strength is above the
factory set threshold level. Normal operation will be in CD mode; continuous mode is normally
used for testing.
CHANGING THE MODE
To change the Mode, click the desired function box on Mode Selection on the main screen. Then
click “Send Button” next to the box. To verify the setting, click on the “Read Button” and the
display will be updated with the mode setting.
KEY ON DELAY
The key on delay is a delay duration between the detection of carrier detect and the transmitter
key on. The key on delay duration can be up set from 0 to 99 milliseconds 1 millisecond
intervals.
50289-BAM-8-800
- 8 -