Installation manual

User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2 & KRT 2A
Revision 4.0
12 of 45
3. OPERATION
3.1. General
There is a normal operating mode in which the turning knob always is
connected to the volume (VOL). The normal operating mode can be left by
pressing the AUD, FREQ or MEMORY button.
When not in the normal mode and there is no pilot action for more than 10
seconds the unit returns to the normal mode.
3.2. ON / OFF Switching
ON / OFF switching is achieved with a self-locking switch.
After power up the following display will show up:
Device-name
KRT2
Software-
Version e.g. V2.0
Gerätename
KRT2
Software-
Version e.g. V2.0
(example)
The unit then starts in the normal operating mode using and displaying the
data last used.
3.3. Frequency Selection
There are two different frequency selection methods:
• Direct Input
• Selection from the favourite list (index 0-99)