Installation manual

User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2 & KRT 2A
Revision 4.0
13 of 45
3.3.1. Direct Frequency Selection
The Standby-Frequency is set with the
tuning knob in 3 different ranges. The
selected range is highlighted and can
be changed with the FREQ button.
Frequency ranges are: 1xx.nnn
1nn.xnn
1nn.nxx
Press the FREQ button once or
several times until the desired
frequency range is highlighted.
When the pointer is not next to the
Standby Frequency window, it will be
repositioned with the first pressing of
the FREQ button.
Exchanges the Active and
Standby frequencies.
When the Exchange button was not pressed, the Standby frequency
display will return to its normal appearance after 20 seconds.
3.3.2. Frequency Selection from the Favourites List
By pressing and operating the turning knob a specific favourite list
position can be accessed [xx] (xx = index 0 … 99). When frequency and
station designator have been defined, they will be displayed in the Standby
and station designator windows.
The favourite list designators can be sorted in alphabetic order (see 3.3.3).
Exchanges the Active and Standby frequencies.