Installation manual

User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2 & KRT 2A
Revision 4.0
16 of 45
3.4. AUD – Audio Menu
Any action in the Audio Menu
requires the pointer (<) to be next
to the Audio menu window (see
picture). When the pointer is next
to the Standby frequency window,
the pointer can be repositioned by
pressing the AUD button once.
VOLnn is the Audio menu default
display. No action on any control for
more than 10 seconds will result in
the VOLnn display.
Audio Menu items can be accessed in the following order by repeatedly
pressing the AUD button.
VOL (default) SQ VOX TXm** INT EXT DIM CON SIT MIC
Audio menu items to right of the above list are more seldomly used than
the left ones.
3.4.1. VOL – Volume
Turning the turning knob changes the receiver volume.
VOLnn Range: 01 - 16
Die VOL setting only concerns the receiver and not the
intercom system. Intercom volume values are set in the INT
audio menu.
.
3.4.2. SQ -- Squelch
Pressing the AUD button once enables the turning knob to change the
squelch level values.
SQnn Value range: 01 – 10
The Squelch setting is depending on several factors.