Installation manual

User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2 & KRT 2A
Revision 4.0
26 of 45
3.9. SET UP - Menu
During power-up the MEMORY buttons must be pressed
There are two functions within the Set-up menu:
• ERASE – Erasing of the favourites (frequency and designator)
• Channel Spacing – 25kHz / 8,33kHz
Programming of the Set-up is done with the lower 3 buttons. Their
function is described on the display.
MEMORY FREQ
Set-up program exit is with the MEMORY button. The unit remains
powered and the normal operating mode is resumed.
Remark: =
3.9.1. ERASE – Erasing the Favourites List
When in the SET UP – Menu select the “ERASE“ submenu with
the .
MEMORY FREQ
Erasing the favourites (frequency and designator) starts after the
button was pressed again. This procedure may last a few minutes during
which time “ERASING“ is displayed.
All INFO frequencies and designators that were stored on delivery are
lost and all favourite index positions (01 to 99) are available to the user.