Installation manual

User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2 & KRT 2A
Revision 4.0
32 of 45
5.7. Finally Audio-Setup
This is an overview for a correct audio set up depending on the usage.
5.7.1. For gliders
Press button AUD 3x for VOX: Set to VOX 10 (turn off).
Press button AUD 4x for TXm: Set to TXm**.
Press button AUD 6x for EXT: Set to EXT 00 (turn off).
Press button AUD 10x for EXT: Set to MIC-Level 11.
5.7.2. For motor gliders
For change mode (motoring & headset – gliding & dynamic microphone)
Press button AUD 3x for VOX: Set to VOX 3.
on condition at motoring.
Press button AUD 4x for TXm: Set to TXm**.
Press button AUD 6x for EXT: Set to EXT 00 (turn off),
or on condition.
Press button AUD 10x for EXT: Set to MIC-Level 5,
select AUTO
5.7.3. Für Motor planes
Press button AUD 3x for VOX: Set to VOX 3 (turn off).
Press button AUD 4x for TXm: Set to TXm**,
or on condition.
Press button AUD 6x for EXT: Set to EXT 00 (turn off),
or on condition.
Press button AUD 10x for EXT: Set to MIC-Level 3,
or on condition.