User Manual

USER MANUAL
ID-R400
HARDWARE
The tags are incased in a 3 3/16” x 2 5/16” x 5/16 (8cm x 5.8cm x .8cm) UL rated ABS
Cellcore plastic housing and contain the internal components of a RF transmitter and
battery source.
LED Indicators
There are 8 LEDs on the front of the ID-R400. As you look at the front of the device
starting on the left the LEDs represent as follows:
-Power- LED signifies that the device has power applied through an external power
supply. Remains constantly lit when power applied
-DIAG (Diagnostic) - LED signifies that the processer is properly functioning. Should
blink on and off at the frequency of one second.
-RFID- LED signifies RF activity is being sensed by the router, should be constantly
toggling if RF is present
-WAN- LED signifies that the router has a connection to the Wide Area Network.
Should blink if connection is present.
-LAN (status on the Local Area Connection) – LED signifies that the router has Local
Area Network activity. Should blink if connection is present.
-WiFi- (Option) LED signifies that WiFi card is installed. LED will remain constant if
card is installed.
-NA – Non-Applicable with this model