User Manual

USER MANUAL
-CF- (Option) LED signifies that a compact flash card has been inserted into compact
flash slot. LED will remain constant if compact flash card is present.
ID-R400
Data Connections
There are three inputs as you look at the top of the device. As the router lay on its back
(the flat side) the inputs are as follows:
-LAN Port- This RJ-45 jack is for the option of setting up a sub network using the router
as a gateway.
-WAN Port – This RJ-45 jack is used to connect the device to the Wide Area Network and
is PoE capable.
-External Wall Power Supply – a supplied 120 volt power source can be used as an
alternate to PoE.
Antennas
There are two fixed non adjustable omni directional RF antennas that will point to the
ground when router is properly fixed to the wall.
ENVIRONMENTAL LIMITS
Humidity: 0%-95% non-condensing