Operation Manual

16
3.0 FUNCTIONS
1. Condensate feed is possible both under pressure and pressure-less:
the condensate is fed from the compressor, the tank or the dryer if possible
with pressure.
2. Chamber for expansion and de-airation with filter from activated
charcoal to filter the exhaust air:
the expansion and de-airation chamber assures a calm surface in the
separator, even if the condensate is fed under pressure. The activated
charcoal filter eliminates the oil from the exhaust air.
3. Space to redirect and calm down the flowing water:
this is where the mechanical separation of oil from water takes place.
4. Oil discharge:
the angle of draining/discharging the oil is adjustable.
5. Filtering:
the activated charcoal filter filters out all the remaining oil droplets and
guarantees the high overall efficiency.
6. Water discharge:
the remaining oil content of the water discharged is less then 10 mg/ltr if the
equipment is correctly dimensioned. This water can be discharged directly into
the sewers.
7. Test valve:
the test valve permits very simply to take discharge water samples.
8. Heating (option):
thermostatically controlled heaters are available for outdoor installation.
9. Oil-collect tank with overflow safe-guard
10. Test set: check-glass and oil test paper.
11. Document compartment
ACR 20 - 30 - 50
ACR 10