Technical Specs
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Copyright
- Trademarks
- Contact Information
- Revision History
- 1: Introduction
- 2: Electrical Specifications
- 3: RF Specifications
- 4: Power
- 5: Software Interface
- 6: Mechanical and Environmental Specifications
- 7: Regulatory Compliance and Industry Certifications
- A: Antenna Specification
- B: Design Checklist
- C: Packaging
- D: References
- E: Acronyms
- Index
Electrical Specifications
Rev 3 Oct.20 31 41113694
Figure 2-8: Recommended Wireless Disable Connection
Full_Card_Power_Off# and RESET#
Note: Host support for Full_Card_Power_Off# is required, and support for RESET# is optional.
Full_Card_Power_Off# and RESET# are inputs to the module that the host uses as
described in Table 2-7.
For timing details, see Power On/Off Timing for the USB on page 48.
Module
R
Wireless
disable control
1
2
3
Q
100k
Host
VCC
PMIC for W_DISABLE1#
10k