User's Guide
Table Of Contents
- User Manual rev5
- User Manual rev5
- FCC.IC Statements rev.P1-8
- DRAFT_T100Tablet_UG_Trimble_Geospatial-MCS_DRAFT0_regulatory version.rev2.pdf
- Safety information
- 1 Introduction
- 2 Basic setup and operation
- 3 Using the Windows 10 operating system
- 4 Connecting to and using wireless networks
- 5 Working with GNSS
- 6 Connecting to accessories and other devices
- 7 Using the camera
- 8 Using the pre-installed apps
- 9 Troubleshooting, downloading updates, and repair
Safety information
Battery care
Use and storage temperature: Lithium-ion batteries are sensitive to high temperatures, so
keep the device's batteries out of direct sun for long periods, and do not leave batteries in
a hot car, especially on a dashboard in full sun or other environments where temperatures
can exceed +70°C (+158°F). Battery life can be shortened if stored, charged, or operated
outside of these temperature ranges. Recommended storage temperature is at room
temperature (~+20°C / +68°F). When you are using or charging the device, it is normal for it
to get warm.
If the interior temperature of the device exceeds normal operating temperatures (for
example, in a hot car or in direct sunlight for extended periods of time), you may
experience the following as it attempts to regulate its temperature automatically:
l The device stops charging.
l If the device cannot regulate its internal temperature, it may go into a Sleep state until it
cools (see Sleep state, page 29).
Move the device to a cooler location out of direct sunlight and wait a few minutes before
trying to use the device again.
Charging: Recharge the battery any time; the battery does not need to be empty or low
before you recharge it. However, it is best to let the battery run to below 10 percent at least
once a month before you recharge it. Use only the manufacturer designated charging
accessories to recharge the batteries. Charge only at temperatures between 0 °C and +45
°C (32°F and 113°F) for best battery life and performance.
The T100 tablet is designed to work in ambient temperatures between -20°C and 60°C (-
4°F and 140°F)and to be stored in temperatures between -40°C and 70°C (-40°F and
158°F). Avoid exposing the device to dramatic changes in temperature or humidity.
Product specifications
Operating System Microsoft Windows 10 Professional, 64-bit
Processor Intel® 8th Generation Core™ i5
Graphics Intel HD Graphics 620
RAM 16 GB
User storage (SSD) 512 GB
Display 10.1” LED-backlight screen with capacitive multi-touch
1920 x 1200 pixels
EMR stylus support
Trimble T100 Tablet User Guide | 19