User's Guide
Table Of Contents
- User Manual rev5
- User Manual rev5
- FCC.IC Statements rev.P1-8
- DRAFT_T100Tablet_UG_Trimble_Geospatial-MCS_DRAFT0_regulatory version.rev2.pdf
- Safety information
- 1 Introduction
- 2 Basic setup and operation
- 3 Using the Windows 10 operating system
- 4 Connecting to and using wireless networks
- 5 Working with GNSS
- 6 Connecting to accessories and other devices
- 7 Using the camera
- 8 Using the pre-installed apps
- 9 Troubleshooting, downloading updates, and repair
Safety information
Battery & Power Standard capacity 90 Wh
Internal, non removable battery
Charge time: 4 hours
I/O module
connectors
USB 3.0 Type-C (x2)
DC power input (1.7 mm DC in)
Office stand
Audio Speaker (2W)
Microphone
3.5mm audio-jack headset connector
Bluetooth BT 5.0
Wi-Fi 2.4 GHz / 5 GHz
802.11 ac
4G LTEMobile
broadband
(optional)
MicroSIM
LTE B2, B4, B5, B13, B17 and B25 , HSPA+, GSM/GPRS/
EDGE, North America (Sierra Wireless EM7565)
LTE B1, B3, B7, B8 and B20, HSPA+, GSM/GPRS/EDGE,
International (Sierra Wireless EM7565)
GNSS u-blox Neo-M8T (Wi-Fi, 4G)
xx channels
GPS L1 C/A, GLONASS, Beidou, QZSS, SBAS
Integrated Real-time:SBAS (EGNOS, WAAS, MSAS, GAGAN), < 4 meter
typical
Dual constellation:GPS+GLONASS, or GPS+Beidou
Camera 8MP, Auto Focus
Sensors Accelerometer
E-Compass
Gyroscope
Ambient Light Sensor
Proximity Sensor
Environmental l Water and Dust Ingress Protection: IP65 - IEC 60529 Edition
Trimble T100 Tablet User Guide | 20