User's Guide
Table Of Contents
- User Manual rev5
- User Manual rev5
- FCC.IC Statements rev.P1-8
- DRAFT_T100Tablet_UG_Trimble_Geospatial-MCS_DRAFT0_regulatory version.rev2.pdf
- Safety information
- 1 Introduction
- 2 Basic setup and operation
- 3 Using the Windows 10 operating system
- 4 Connecting to and using wireless networks
- 5 Working with GNSS
- 6 Connecting to accessories and other devices
- 7 Using the camera
- 8 Using the pre-installed apps
- 9 Troubleshooting, downloading updates, and repair
Introduction
Registration
Configuration options
In the box
Replacement and spare or optional accessories
Parts of the T100 tablet
This user guide describes how to configure and use the Trimble
®
T100 tablet powered by
the Microsoft
®
Windows
®
10 Professional operating system. The information in this guide
supplements the information in the Quick Start Guide, which you received in the box with
the device.
Even if you have used other Trimble handheld or tablet field computers before, it is
recommends that you spend some time reading this guide to learn about the special
features of the product.
WARNING – Before you use this product, make sure that you have read and
understood all safety requirements. Failure to follow these safety instructions could
result in fire, electric shock, or other injury, or damage to the tablet computer and/or
other property. For more information refer to Safety information, page 15 of this guide.
1
Trimble T100 Tablet User Guide | 22